[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Errors Verifying Ruby Bundler



> On Jul 28, 2014, at 15:53, Kevin Conaway <kevin conaway gmail com> wrote:
> 
> Thanks for the update.  Is the comprehensive guide up to date with respect to the RPM repos and other such info that would cause dependency issues?

To my knowledge, yes, but be suspect of software version numbers that may be out of date. When in doubt, try the latest RPM.

> On Mon, Jul 28, 2014 at 2:44 PM, N. Harrison Ripps <hripps redhat com> wrote:
> 
> > On Jul 28, 2014, at 14:33, Kevin Conaway <kevin conaway gmail com> wrote:
> >
> > Hi Harrison, has the comprehensive guide been updated?
> 
> Not yet. I am still neck-deep in (re-)testing the release and trying to get our CI builds back to passing.
> 
> My two notes on the comprehensive guide from last week were:
> 
> * Jenkins RPM version is wrong
> 
> But I don't know which version is "right" because of Mark Davidson's feedback from today that the Jenkins cartridge doesn't appear to be working. So we need to vet his deployment before we can put a version update in.
> 
> * Add pam_cgroup configs
> 
> This is easy enough - https://github.com/openshift/puppet-openshift_origin/blob/master/manifests/plugins/container/selinux.pp#L109-L112
> 
> I just need time to get that in but I'd prefer to make one commit with all of the updates.
> 
> >
> >
> > On Fri, Jul 25, 2014 at 12:39 PM, N. Harrison Ripps <hripps redhat com> wrote:
> >
> > > On Jul 25, 2014, at 12:07, Kevin Conaway <kevin conaway gmail com> wrote:
> > >
> > > If I start over, can I still follow the comprehensive install guide or should I use the oo-install / puppet method?
> >
> > oo-install and puppet are the most well-tested methods right now; I'd recommend trying those. I have a short list of fixes to the comprehensive guide that I will make today, time permitting.
> >
> > >
> > >
> > > On Fri, Jul 25, 2014 at 11:12 AM, N. Harrison Ripps <hripps redhat com> wrote:
> > >
> > > > On Jul 25, 2014, at 10:14, Kevin Conaway <kevin conaway gmail com> wrote:
> > > >
> > > > How can I clean up the rpm dependencies and reinstal them so I get the latest?
> > >
> > > That is a good question. You can target specific RPMs by `yum downgrade`-ing them, but chasing all of the potential dependency issues that have been solved this week on a one-by-one basis may lead you down the road to insanity. If it is an option for you, I'd recommend starting with a clean slate. install.openshift.com has been updated to work with the newer puppet module and the corrected repo.
> > >
> > > >
> > > >
> > > > On Fri, Jul 25, 2014 at 10:05 AM, N. Harrison Ripps <hripps redhat com> wrote:
> > > > Hey all--
> > > >
> > > > > On Jul 25, 2014, at 08:42, Kevin Conaway <kevin conaway gmail com> wrote:
> > > > >
> > > > > Thanks Josef,
> > > > >
> > > > > I already have the ruby193-v8 package installed (Package 1:ruby193-v8-3.14.5.10-2.el6.x86_64 is obsoleted by 1:v8314-v8-3.14.5.10-3.6.el6.x86_64 which is already installed)
> > > > >
> > > > > Running scl enable v8314 ruby193 gives an error:
> > > > >
> > > > > /var/tmp/sclGc5Olz: line 8: ruby193: command not found
> > > > >
> > > > > The X_SCLS environment variable is not set on my system.
> > > >
> > > > Just be aware that we identified two problems this week that may be affecting you:
> > > >
> > > > 1. As I talked about previously, the RPM dependencies chain in our deps repo was stale. So you may not have completely correct RPMs in play.
> > > >
> > > > 2. Our puppet module sets a priority on the EPEL repo (which is written to openshift-optional.repo in /etc/yum.repos.d/ by the module). This is a problem that has been fixed in the latest puppet module version (4.0.6). TO manually fix your repo entry, remove the 'priority' line from the file completely.
> > > >
> > > > >
> > > > >
> > > > > On Fri, Jul 25, 2014 at 3:01 AM, Josef Stribny <jstribny redhat com> wrote:
> > > > > > do you have the v8 engine installed? Therubyracer needs v8.
> > > > >
> > > > > I will try to be more accurate. We removed v8 from the ruby193 scl and now therubyracer should pick up v8 from v8314 scl. You have to explicitly enable v8 scl with ruby193 (scl enable v8314 ruby193...) to make it work. You can check X_SCLS env variable for enabled collections:
> > > > >
> > > > > $ env | grep X_SCLS
> > > > > X_SCLS=ruby193 v8314
> > > > >
> > > > > For older versions of RHSCL, you should be able to install ruby193-v8 package.
> > > > >
> > > > > I hope it's clearer now, but how this is handled by the OpenShift broker I have no idea.
> > > > >
> > > > > Josef
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Josef Stribny" <jstribny redhat com>
> > > > > To: "Kevin Conaway" <kevin conaway gmail com>
> > > > > Cc: dev lists openshift redhat com
> > > > > Sent: Friday, July 25, 2014 8:44:13 AM
> > > > > Subject: Re: Errors Verifying Ruby Bundler
> > > > >
> > > > > Hi,
> > > > >
> > > > > do you have the v8 engine installed? Therubyracer needs v8.
> > > > >
> > > > > Josef
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Kevin Conaway" <kevin conaway gmail com>
> > > > > To: dev lists openshift redhat com
> > > > > Sent: Thursday, July 24, 2014 9:16:34 PM
> > > > > Subject: Errors Verifying Ruby Bundler
> > > > >
> > > > > I'm running in to issues verifying the Ruby bundler:
> > > > >
> > > > > http://openshift.github.io/documentation/oo_deployment_guide_comprehensive.html#prerequisite-mcollective-client
> > > > >
> > > > > Here is the pastebin output: http://pastebin.com/Xu2vywZg
> > > > >
> > > > > >From reading the documentation on execjs, it should be picking up therubyracer impl by default. I see that included in the bundle --local output so I'm not sure why its not found.
> > > > >
> > > > > _______________________________________________
> > > > > dev mailing list
> > > > > dev lists openshift redhat com
> > > > > http://lists.openshift.redhat.com/openshiftmm/listinfo/dev
> > > > >
> > > > > _______________________________________________
> > > > > dev mailing list
> > > > > dev lists openshift redhat com
> > > > > http://lists.openshift.redhat.com/openshiftmm/listinfo/dev
> > > > >
> > > > > _______________________________________________
> > > > > dev mailing list
> > > > > dev lists openshift redhat com
> > > > > http://lists.openshift.redhat.com/openshiftmm/listinfo/dev
> > > >
> > > >
> > >
> > >
> >
> >
> > _______________________________________________
> > dev mailing list
> > dev lists openshift redhat com
> > http://lists.openshift.redhat.com/openshiftmm/listinfo/dev
> 
> 



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]