[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

origin byo via ansible - etcd wrong IP



Hi all,

I would like to install one master and two nodes to my virtual box. I have problem with setting the primary IP address.

All my VM have two interfaces: 10.0.2.15 (master NAT) and 10.2.2.10 (host only).

When I run the ansible-playbook I got error with etcd, which tries to connect to the 10.0.2.15. There is nothing. How can I setup the IP address ?

My inventory looks like this

[masters]

master openshift_ip=10.2.2.10 openshift_public_ip=10.2.2.10


[etcd]

master openshift_ip=10.2.2.10 openshift_public_ip=10.2.2.10


[nodes]

master openshift_node_labels="{'region': 'infra', 'zone': 'default'}" openshift_ip=10.2.2.10 openshift_public_ip=10.2.2.10

node1 openshift_node_labels="{'region': 'primary', 'zone': 'default'}" openshift_ip=10.2.2.11  openshift_public_ip=10.2.2.11

node2 openshift_node_labels="{'region': 'primary', 'zone': 'default'}" openshift_ip=10.2.2.12  openshift_public_ip=10.2.2.12



When I manually change the master-config.yaml, the etched starts working. But I can’t do this by the ansible.

etcdClientInfo:

  ca: master.etcd-ca.crt

  certFile: master.etcd-client.crt

  keyFile: master.etcd-client.key

  urls:

    - https://10.2.2.10:2379




Thanks Mila


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]